关于机箱配置

商用台式机、家用电脑、台式机工作站讨论区

版主: xyevolve

版面规则
1. 本版是定位于惠普桌面计算机及工作站的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题,不鼓励站内信件私下交流,独知知不如众知知。
3. 本版允许转贴或引用他人的作品,但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版禁止灌水,包括但不限于任何与所讨论主题无关的回复,无意义字符,直接复制其他回复等。
6. 本站附件仅限个人使用,请在下载后24小时内删除,本站不对其造成的结果负任何责任。
回复
illusionWing
注册用户
帖子: 40
注册时间: 2013年 2月 15日 15:11 星期五

关于机箱配置

帖子 illusionWing » 2013年 7月 13日 09:50 星期六

话说前一段时间看上了Z220/Z620...觉得都很好~就是有一个问题我很好奇,如果客户订购了机箱电磁锁并且在BIOS中已经锁住,与此同时,机器有没有办法开机,那么这个电磁锁有没有办法解除呢~~谢谢~

20130722更新,已解决谢谢!!
上次由 illusionWing 在 2013年 7月 22日 14:22 星期一,总共编辑 1 次。

头像
MUDBOY
创始人
帖子: 3877
注册时间: 2010年 12月 28日 21:17 星期二

Re: 关于机箱配置~

帖子 MUDBOY » 2013年 7月 14日 10:27 星期天

有趣的问题, 希望有这方面的资料参考下.
提倡分享之精神, 技术问题请在相关版面直接发帖, 站内短信恕不答复.
I don't answer private messages on topics of public interest, because it defeats the whole purpose of a message board.

piyopiyo81
注册用户
帖子: 30
注册时间: 2012年 3月 23日 11:39 星期五

Re: 关于机箱配置~

帖子 piyopiyo81 » 2013年 7月 19日 01:45 星期五

不知道你说的是Solenoid Lock还是其他配件
如果是Solenoid Lock的话你可以手动解除但前提是你需要有Solenoid Lock附带的FailSafe Key
Disabling the Solenoid Lock mechanically
NOTE: If the Solenoid Lock is locked and disabled mechanically, the new lock will be automatically locked as soon as the computer is restarted.
1. Exit all software applications, shut down the operating system software, turn off the computer and any external devices, and then disconnect the power cord from the power outlet.
2. Lay the computer on its side with the cover facing up.
3. Using the FailSafe Key included in this kit, remove the two tamper-resistant screws that secure the Solenoid Lock to the chassis.
4. After the screws are removed, the Solenoid Lock will fall inside the chassis.
5. Remove the computer side acce ss panel to access the internal components of the computer.
6. Unplug the Solenoid Lock cable from the syst em board and remove the lock assembly.

Installing an HP Solenoid Lock and Hood Sensor
http://h20566.www2.hp.com/portal/site/h ... cachetoken

illusionWing
注册用户
帖子: 40
注册时间: 2013年 2月 15日 15:11 星期五

Re: 关于机箱配置~

帖子 illusionWing » 2013年 7月 22日 14:23 星期一

piyopiyo81 写了:不知道你说的是Solenoid Lock还是其他配件
如果是Solenoid Lock的话你可以手动解除但前提是你需要有Solenoid Lock附带的FailSafe Key
Disabling the Solenoid Lock mechanically
NOTE: If the Solenoid Lock is locked and disabled mechanically, the new lock will be automatically locked as soon as the computer is restarted.
1. Exit all software applications, shut down the operating system software, turn off the computer and any external devices, and then disconnect the power cord from the power outlet.
2. Lay the computer on its side with the cover facing up.
3. Using the FailSafe Key included in this kit, remove the two tamper-resistant screws that secure the Solenoid Lock to the chassis.
4. After the screws are removed, the Solenoid Lock will fall inside the chassis.
5. Remove the computer side acce ss panel to access the internal components of the computer.
6. Unplug the Solenoid Lock cable from the syst em board and remove the lock assembly.

Installing an HP Solenoid Lock and Hood Sensor
http://h20566.www2.hp.com/portal/site/h ... cachetoken
您好!谢谢您的回复,我不是很清楚,但是客户看到之后顺利解决了。再次感谢!

浪子清风
注册用户
帖子: 48
注册时间: 2013年 10月 17日 01:12 星期四

Re: 关于机箱配置

帖子 浪子清风 » 2013年 11月 4日 16:27 星期一

学习了一下……看起来是很特别的一个技术……

wenliping1981
注册用户
帖子: 132
注册时间: 2012年 1月 31日 21:49 星期二

Re: 关于机箱配置

帖子 wenliping1981 » 2013年 11月 7日 19:11 星期四

貌似很NB的技术啊。

gnaixuiluhc
注册用户
帖子: 34
注册时间: 2013年 11月 19日 21:05 星期二

Re: 关于机箱配置

帖子 gnaixuiluhc » 2013年 11月 19日 21:10 星期二

太高端了 第一次听说电磁锁

回复