分页: 1 / 1

关于机箱配置

发表于 : 2013年 7月 13日 09:50 星期六
illusionWing
话说前一段时间看上了Z220/Z620...觉得都很好~就是有一个问题我很好奇,如果客户订购了机箱电磁锁并且在BIOS中已经锁住,与此同时,机器有没有办法开机,那么这个电磁锁有没有办法解除呢~~谢谢~

20130722更新,已解决谢谢!!

Re: 关于机箱配置~

发表于 : 2013年 7月 14日 10:27 星期天
MUDBOY
有趣的问题, 希望有这方面的资料参考下.

Re: 关于机箱配置~

发表于 : 2013年 7月 19日 01:45 星期五
piyopiyo81
不知道你说的是Solenoid Lock还是其他配件
如果是Solenoid Lock的话你可以手动解除但前提是你需要有Solenoid Lock附带的FailSafe Key
Disabling the Solenoid Lock mechanically
NOTE: If the Solenoid Lock is locked and disabled mechanically, the new lock will be automatically locked as soon as the computer is restarted.
1. Exit all software applications, shut down the operating system software, turn off the computer and any external devices, and then disconnect the power cord from the power outlet.
2. Lay the computer on its side with the cover facing up.
3. Using the FailSafe Key included in this kit, remove the two tamper-resistant screws that secure the Solenoid Lock to the chassis.
4. After the screws are removed, the Solenoid Lock will fall inside the chassis.
5. Remove the computer side acce ss panel to access the internal components of the computer.
6. Unplug the Solenoid Lock cable from the syst em board and remove the lock assembly.

Installing an HP Solenoid Lock and Hood Sensor
http://h20566.www2.hp.com/portal/site/h ... cachetoken

Re: 关于机箱配置~

发表于 : 2013年 7月 22日 14:23 星期一
illusionWing
piyopiyo81 写了:不知道你说的是Solenoid Lock还是其他配件
如果是Solenoid Lock的话你可以手动解除但前提是你需要有Solenoid Lock附带的FailSafe Key
Disabling the Solenoid Lock mechanically
NOTE: If the Solenoid Lock is locked and disabled mechanically, the new lock will be automatically locked as soon as the computer is restarted.
1. Exit all software applications, shut down the operating system software, turn off the computer and any external devices, and then disconnect the power cord from the power outlet.
2. Lay the computer on its side with the cover facing up.
3. Using the FailSafe Key included in this kit, remove the two tamper-resistant screws that secure the Solenoid Lock to the chassis.
4. After the screws are removed, the Solenoid Lock will fall inside the chassis.
5. Remove the computer side acce ss panel to access the internal components of the computer.
6. Unplug the Solenoid Lock cable from the syst em board and remove the lock assembly.

Installing an HP Solenoid Lock and Hood Sensor
http://h20566.www2.hp.com/portal/site/h ... cachetoken
您好!谢谢您的回复,我不是很清楚,但是客户看到之后顺利解决了。再次感谢!

Re: 关于机箱配置

发表于 : 2013年 11月 4日 16:27 星期一
浪子清风
学习了一下……看起来是很特别的一个技术……

Re: 关于机箱配置

发表于 : 2013年 11月 7日 19:11 星期四
wenliping1981
貌似很NB的技术啊。

Re: 关于机箱配置

发表于 : 2013年 11月 19日 21:10 星期二
gnaixuiluhc
太高端了 第一次听说电磁锁