Re: DreamColor屏幕颜色映射板(color mapping board firmware)的固件
发表于 : 2017年 8月 5日 22:41 星期六
解包了setup.exe文件,看了下dtflash.ini文件:MUDBOY 写了:还有一个windows下刷机的程序121版本,最好windows 7下操作
The following conditions must be observed:
• Close all applications and save all work. The system will automatically restart at the end of the update process. 关掉不必要的程序,升级会自动重启
• Keep the laptop powered on at all times. Do NOT run off of battery during the update process. 始终保持外接电源连接,升级时不要关闭(断开)电池。
• Attach an external display to view the progress. Set the external display as primary. Be sure that the application window is moved to the external display.外接显示器一边监控升级过程,设置为扩展模式。
• Do NOT run in Clone mode. Clone mode is not supported and will not allow HP Mobile Display Updater to update the firmware in the panel. Clone mode is when the contents of the desktop are cloned or mirrored on both the laptop and external display. Switch the display settings to extended desktop through Display Appearances and re-launch the application.不要把外接显示屏设置成克隆模式。
• When the firmware upload process is engaged, the laptop panel will be black FOR UP TO TEN MINUTES! DO NOT TURN OFF THE LAPTOP! Follow the status bar progress on the external display.一旦升级开始不要关闭电脑,整个过程可能会持续10分钟,此阶段使用外置显示器监控过程。
• An audio tone will be played during the update. If the laptop speakers are set to mute, the audio sound will not be heard.升级时喇叭会哔哔哔响。
• The NUM LOCK and CAP LOCK LED status indicators will flash during the update process.升级时大小写和数字键盘指示灯会闪
固件版本 0071应该是HEX,转换成DEC应该是113?所以还是113版本的固件吗?[LGD0220]
Scalar=4
Description=DreamcolorII
FirmwareFile=hm2\8740w\Mars_DC2_4MB.hex
IspFileName=hm2\8740w\isp_spi_ext.hex
FirmwareRev = 0071
CurrTestRev = 0000