Virtual Connect v4.01 - Bandwidth Optimization Validation

HP ProLiant、BladeSystem、Integrity、Integrity NonStop、9000、Alpha服务器等

版主: xyevolve

版面规则
1. 本版是定位于惠普服务器的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题,不鼓励站内信件私下交流,独知知不如众知知。
3. 本版允许转贴或引用他人的作品,但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版禁止灌水,包括但不限于任何与所讨论主题无关的回复,无意义字符,直接复制其他回复等。
6. 本站附件禁止用于商业目的,请在下载后24小时内删除,本站不对其造成的结果负任何责任。
回复
SYSTEM
网站编辑
帖子: 265
注册时间: 2012年 2月 20日 15:45 星期一

Virtual Connect v4.01 - Bandwidth Optimization Validation

帖子 SYSTEM » 2013年 11月 19日 14:02 星期二

========Posted by Reginald=========

With the new v4.01 firmware for VC, as you know one of the key features that was introduced with the latest rev is “Bandwidth Optimization”.

I would like to know what is the best way to test and validate that a vNIC can exceed the allocated bandwidth that has been assigned?

SYSTEM
网站编辑
帖子: 265
注册时间: 2012年 2月 20日 15:45 星期一

Re: Virtual Connect v4.01 - Bandwidth Optimization Validatio

帖子 SYSTEM » 2013年 11月 19日 14:04 星期二

========Posted by Dan=========

Linux: iPerf or NetPerf, if you don’t get the performance you are looking for make sure Multithreading in the tool was not turned off.

Windows: NTTTCP, similarly there is a CLI switch to spin up X number of threads. 4-8 worked best for me.

Keep in mind that the new option allows transmitting OUT from the blade at higher than the VMNIC Min setting.
It has always allowed receiving data IN to the blade at higher than the VMNIC setting.

And also remember that with 4.01 and the new setting, your FlexNICs will show the MAX value to the OS as the pipe size. The NIC Speed in the OS will not dynamically change back and forth as bursting is occurring.

回复