HP Integrity Server rx3600 RAID模式设置

HP ProLiant、BladeSystem、Integrity、Integrity NonStop、9000、Alpha服务器等

版主: xyevolve

版面规则
1. 本版是定位于惠普服务器的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题,不鼓励站内信件私下交流,独知知不如众知知。
3. 本版允许转贴或引用他人的作品,但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版禁止灌水,包括但不限于任何与所讨论主题无关的回复,无意义字符,直接复制其他回复等。
6. 本站附件禁止用于商业目的,请在下载后24小时内删除,本站不对其造成的结果负任何责任。
回复
头像
MUDBOY
创始人
帖子: 3877
注册时间: 2010年 12月 28日 21:17 星期二

HP Integrity Server rx3600 RAID模式设置

帖子 MUDBOY » 2014年 5月 22日 15:24 星期四

HP Integrity Server rx3600 RAID模式设置

1, During the Boot Menu, select 'EFI Shell [Built In]'
启动rx3600服务器到EFI Shell模式
boot_efishell.png
2, In the EFI Shell, enter the command 'drvcfg -s' to get into RAID configuration.
输入'drvcfg -s'命令进入RAID配置界面。

3, Here it uses the SAS1068 Adapter, select it and press Enter to get into adapter properties.
选择SAS1068这个卡进入RAID设置选项。

4, Enter 'RAID Properties'
进入'RAID Properties'选项

5, Choose 'Create IM Volume'
选择新建IM Volume

6, In the 'RAID Disk' colume, change tag from 'No' to 'Yes' by pressing Space key, we will choose 2 hard disks to create a RAID 1 volume, and the rest two disks for another RAID 1 volume.

出现硬盘的列表,此例中有四个硬盘。把光标移动到每个硬盘的'RAID Disk'处,按空格键把No变成Yes。

选一个硬盘的时候会提示保持数据还是删除数据,按自己的需要选择。(新装系统一般选D删除原有数据)

这里我们选择两两配对,创建了两个阵列Volume。
disk.png
disk2.png
disk3.png
7, Save the Configuration and Exit
按Esc键,选择保存退出。
save_exit.png
8, Press Enter key to restart the controller
退出配置界面后按Enter键确定重启阵列控制
restart_controller.png
器。

9, User 'map -r' command in EFI Shell to display the newly created RAID 1 volumes.
此时两个RAID1模式的磁盘阵列就创建成功了,在EFI Shell下用map命令可以查看到。原来的单个硬盘已经不显示,取而代之的是两个阵列磁盘。
map_check.png
您没有权限查看这个主题的附件。
提倡分享之精神, 技术问题请在相关版面直接发帖, 站内短信恕不答复.
I don't answer private messages on topics of public interest, because it defeats the whole purpose of a message board.

回复