Enabling NPIV on Broadcom 534flb and 534m

HP ProLiant、BladeSystem、Integrity、Integrity NonStop、9000、Alpha服务器等

版主: xyevolve

版面规则
1. 本版是定位于惠普服务器的技术讨论区。
2. 本版鼓励发帖共同讨论技术问题,不鼓励站内信件私下交流,独知知不如众知知。
3. 本版允许转贴或引用他人的作品,但必须声明原作者信息。
4. 本版禁止发表出售、求购、或其他非技术讨论等帖子。
5. 本版禁止灌水,包括但不限于任何与所讨论主题无关的回复,无意义字符,直接复制其他回复等。
6. 本站附件禁止用于商业目的,请在下载后24小时内删除,本站不对其造成的结果负任何责任。
回复
SYSTEM
网站编辑
帖子: 265
注册时间: 2012年 2月 20日 15:45 星期一

Enabling NPIV on Broadcom 534flb and 534m

帖子 SYSTEM » 2014年 9月 18日 10:39 星期四

=====Posted by Macro=====
Does anyone know how to enable NPIV on the Broadcom 534flb or 534m CNA adapter?
When I look at the adapter details it is disabled by default.
So it seems possible to enable it but I haven’t found any documentation on how to do this.
npiv_disabled.png
您没有权限查看这个主题的附件。

SYSTEM
网站编辑
帖子: 265
注册时间: 2012年 2月 20日 15:45 星期一

Re: Enabling NPIV on Broadcom 534flb and 534m

帖子 SYSTEM » 2014年 9月 18日 10:45 星期四

=====Posted by Karl=====

The 578xx (534FLB and 534M) does support FCoE NPIV (N_Port ID Virtualization - multiple FCoE WW port names on the same physical port) on both Windows and Linux but not on VMWare (this is due to the VMWare’s Open FCoE software stack not supporting NPIV yet).

You cannot create an NPIV via Windows Device Manager.

You could use the BACS4’s GUI to create both Linux and Windows FCoE NPIVs by left clicking on an FCoE Adapter instance and selecting either “Create a Virtual Port” or “Create Multiple Virtual Ports”.

You could also use BACS4cli to do the same thing on both Linux and Windows – using the FCoE “createnpivport” and “createmultinpivport” CLI commands – see the BACSCLI_Readme.txt file for more information. Note that HP’s Network Configuration Utility (NCU) has not been upgraded to support 578xx FCoE yet, and my understanding is NCU will not be available for use on Win2012 and Win2012R2 (while BACS4 is available) – see http://h10032.www1.hp.com/ctg/Manual/c03916480.pdf.

On Win2012/2012R2, you can use the MS PowerShell command ”Add-VMFibreChannelHba -VMName MyVmName -SanName MySanName –GenerateWwn” – see http://technet.microsoft.com/en-us/libr ... 48550.aspx.

Additionally, you could use the Linux “vport_create” command to create an NPIV on an FCoE adapter – see https://fedoraproject.org/wiki/Features ... Management.

Note that while NPIV is supported, Virtual Fibre Channel (vFC) is not currently supported yet.

BACS4 screen captures:
npiv_bacs1.png
npiv_bacs2.png
您没有权限查看这个主题的附件。

回复